| Sr.No. | Components | Description |
|---|
| 1 | TOP FRAME | 50mm X 50mm MS Sq. Pipe or 75mm x 75mm MS Sq. Pipe |
| 2 | BOTTOM FRAME | 150mm X 75mm “I” Beam (5mm Thick) |
| 3 | STIFFENER TOP | 40 x 20 M.S.Sq.Pipe |
| 4 | STIFFENER BOTTOM | 150mm x 75mm “I” Beam (5mm Thick) |
| 5 | SIDE POST | 75mm X 75mm Angle (5mm Thick) |
| 6 | SIDE WALL STIFFENERS (Internal) | Specially formed 1.2mm C.R.C. Post Section – 18SWG |
| 7 | PANELLING OUTSIDE | Corrugated G.I Sheet- 1.2mm thick or Corrugated M.S Sheet- 1.2mm |
| 8 | INTERNAL WALL PANELLING | 9mm Both Side Laminated Particle Boards |
| 9 | ROOF OUTSIDE | G.I Sheet- 1.2mm or M.S Sheet 1.2mm Thick thick Properly Sloped & Water Tight |
| 10 | False Ceiling | 9mm Both Side Laminated Particle Boards |
| 11 | BOTTOM FLOORING | 18mm Cement Board with Vinyl Carpet |
| 12 | ALUMINIUM WINDOWS | Double Shutter Sliding Aluminum Powder Coated Windows Tinted Glass with Safety Grills |
| 13 | DOOR | Insulated with for locking agreement, hold draft & handles |
| 14 | INSULATION | Glass Wool /Rockwool Insulation-(Side Wall-50mm), (Ceiling -50mm) 48Kg Density |
| 15 | WIRING | All wiring shall be concealed type & shall be of PVC insulated copper wire (KEI). |
| 16 | ELECTRICAL MATERIAL | All electrical fittings in the Portable Cabin shall be 220-240V, AC 50Hz, and Switch Socket, Light, telephone, Fans, Split AC point etc. ALL ISI MARKED. |
| 17 | OUTSIDE PAINTING | Phosphate the Cabin & Painting with 1 coat of Epoxy Primer with 2 Coat of Epoxy Paint. |
| 18 | LEGS | 5 inch Height, Four Legs at all four corners. |
| 19 | HOOKS | Specially formed Hooks for Easy Lifting & Shifting |
| 20 | PARTITION WALL(WHEREVER APPLICABLE) | MS Pipe Stiffener with 8mm MDF |
